TurboChef - NGC-3011 - Top Convection Heater Service Kit

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

TurboChef - NGC-3011 - Top Convection Heater Service KitTurboChef NGC 3011 Top Convection Heater Service Kit (NGC) F2 faults mean the oven is not staying hot enough to cook food. Usually it is a top wire that has burnt off, a heater (NGC 3011 or NGC 3003) has gone bad or a SSR (NGC 3005) isn't operating properly. It can also occur if the door is left open for too long in between cook cycles or the white glass waveguide covers (NGC 3029) are cracked or broken inside the oven.

This fault can be caused by bent door switches (102012 or i1-3207) or faulty hinges

This is often caused by either a dirty fan or faulty fan that should be replaced

This can occasionally blow the 20A Fuse (100599)

TurboChef - NGC-3083 - Alternate Sound Device (C3 / C3D / NGC / HHB / HHB2)

APW Wyott - 1481710 - Probe

TurboChef - NGC-1418 - Low Voltage Wire Harness (NGC) (1 Left Side Door Switch) - Replaced by NGC-1464-1

TurboChef - 100592 - 12 Amp Fuse (C3 / CD3 / NGC / i5 / i3 / NGO / HHB / HHB2)

F7 Faults can be caused by one or more thermocouples failing in the unit

There are a number of things that can cause your relays to be faulty

TurboChef - NGC-3062-1 - HV Transformer (Non-Japan) (NGC / i5 / i3 / NGO)

F8 Faults can be caused by a faulty IR element

TurboChef - NGC-1007 - TurboChef NGC Tornado Service Manual