Stainless Steel Wave Spring for CR2032 Case - 100 pcs/pck-CR20WS-SPR Material:SS316

Stainless Steel Wave Spring for CR2032 Case - 100 pcs/pck-CR20WS-SPR Material:SS316100 pcs Wave springs made of 304 or 316 Stainless Steel for CR2032 coin cell. Please choose the material from the options bar. Note: this wave spring may be used for CR2325 or CR2450 cell with the flat spacer as below. You may use silver glue stick spring with spacer to avoid moving Click the picture below to see how to place the spacer and spring into button case: The CR2032 case and spacer shown in picture are not included

Carrier Concentration:        (0

<100> or <111>

we strongly recommend pressing powder with a professional laboratory hydraulic press to ensure the evenest pressing interface and uniform pressure force

Our Small-scale Metallographic Laboratory setup:

Access the Over-pressure limit screw by removing the front panel (click first picture below for details)

12 @ 100 oC

08 microns

The micrometer heads are built-in doctor blade frame to adjust the gap between slot die and substrate

1 side polished

18 NCM523 + Graphite 3

Good lattice match with perovskite structure superconductors

0 g /m^2 ± 0