Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

MDX2 M61T FlashlightMalkoff MDX2 with a Malkoff M61T (Throw) preloaded in a MDX Head. The output is approximately 480 measured Out the Front Lumens. If the optional H L Switch is installed (see Options above), the High Low is controlled by head rotation. The low output is approximately 18 lumens with two primary CR123 batteries. The On Off switch is a forward clicky with momentary function. If you plan to use two CR123 primary cells, you may need to stretch the spring in

This is a tailcap switch activated 210-300 Lumen

If the optional H/L Switch is installed (see Options above)

The LED is a Cree XP-L HI

If you are not familiar with the safety rules of

Material: Aerospace Grade ASTM Certified Domestic 6Al/4V titanium (50% more expensive than consumer grade titanium) insures maximum quality and consistency

It always comes on in Low

Black Type III Hard Anodized Malkoff MD2 Flashlight with Malkoff M61 SHO

Protected batteries are longer than unprotected batteries due to the addition of the protection circuit

Please request the spring in a follow up email to cathy@malkoffdevices

It is used in place of a standard cell to lower overall voltage and maintain the flashlight body length

The LED is a Luminous Devices SST-20

0v (2x CR123) LUMENS 8/80/1050-1200** 10/80/850 CANDELA high = 40K high = 33K MAH DRAW 10/85/2800 30/100/1400 *Below 3

Exchange/Return Notes