BEP 2-Position SPST Push-Pull Switch w/Contoured Knob - OFF/ON [1001307] Brand_ProMariner

BEP 2-Position SPST Push-Pull Switch w/Contoured Knob - OFF/ON [1001307] Brand_ProMariner2 Position SPST Push Pull Switch w Contoured Knob OFF ON Single pole, single throw switch turns one circuit on and off. Heavy duty, noncorrosive construction with moisture repellent insulators. Brass case, stem, terminals and mounting hardware. All knobs are screw on type. Features: Nominal voltage is 6 36V DC Rated for 10A at 12V DC #8 32 screw terminals Fits panels up to 3 4" thick Same as Cole Hersee part number M 628 WARNING: This product can

The NF-Series Boat Fender

and anemometer into one package - making setup easy with great performance and reliability

Operation - Remote joystick control

304 Stainless Steel Trumpets

12V DC Amps: 990mA

it is recommended that a Vented Loop Solenoid Valve (37068-2000) is connected to the vent air inlet to ensure maximum electric toilet performance and prime-ability

the FPM100 can be calibrated for irregular tank shapes so that you know the true level of the tanks

12mm hole in the hull to feed the cable through and 3 screws in place

Meets ABYC E-11 when used with an ELCI Main circuit breaker and mounted within 10 feet of the shore power inlet

Levered Chain Stopper f/3/8" or 10mm Chain

2 galvanized tie plates

M232) M300