34 Piece 3/8" drive Metric Socket Set Service Tools

34 Piece 3/8" drive Metric Socket Set Service ToolsA comprehensive set with deep reach sockets as well as standard. All 6 point sockets, 10mm 19mm deep reach and standard from 6mm 22mm, 2 extension bars (75mm & 100mm), Sliding tee bar, universal joint and professional ratchet wrench.

We tested this stand for a magazine article and were suitably impressed

The suction cup attached in the same way as with a lapping stick and the body of the tool is held in your left hand and drill is run fairly slowly and the valve is oscillated back and forward just as with the stick

reverse polarity

Supplied with 4 x 36mm long bits (Ph2

- Suitable for left and right hand torque settings

high torque grip handles

Whilst this is sold by the manufacturer to lock Vee belt pulleys

if the side plate of the connecting link is in the right position and you have to stop pushing it

hardened carbon steel bearing/gear grips in the size ranges of 30-50mm and 50 - 75mm with a hardened

This tool is used on more modern forks (Right Way Up (RU) and Up Side Down (USD)) to hold the damper road especially for the bleeding of air out

The tool grips the top of the stud threads and has a ball bearing that bears on the top face of the stud therefore not causing any damage

- Imperial sizes x 100mm long: 1/20"