Katana-V ultrasonic

Katana-V ultrasonicKatana V is ultrasonic tip with flat surface that should face towards the separated file. The instrument is used (dry) to wedge into the space on the inside of the canal curve between the separated file and the canal wall, creating a small space adjacent to the fractured file edge.

creating a small space adjacent to the fractured file edge

Katana-V is ultrasonic tip with flat surface that should face towards the separated file

Used in slow speed handpiece at 600 RPM

The Micro-trephine bur is used at 600 rpm in a counter-clockwise direction to encourage separated files to unthread from the canal as the trough is cut

Used to sharpen the TFRK-S

ED89(TFRK-Katana H) tips usually cut only a quarter slot of the circle

Used in straight nosed handpiece at 5000RPM

Replacement Wire for Loop that can be self-installed by doctor

and Katana-H when they become chipped or dull

The ultrasonic preparation continues until the movement of the broken instrument is confirmed under the 4 magnification

Tiny cylinder with cutting blades on its tip to create a trough 1 mm deep around the coronal portion of the separated file

The TFRK-ME has extremely fine spear-shaped tips with a smooth surface for bypassing ledged canals and exploring the canal for broken files or other impediments (Seen as instrument on right)