1750 Grade MoSi2 Heating Element (30x300mm) Presses

1750 Grade MoSi2 Heating Element (30x300mm) PressesSpecifications D1: 12mm D2: 6mm A: 30mm L=L1+L2:=180+120=300mm Materials: MoSi2 Max. surface temperature: 1750 C Working temperature: 1700C (in air, < 1 hour) Max. 1600C ( in air) continuous 1600C (in N2) 1220C ~ 1500C (in H2) Volume Density: 5 ~ 5. 6g cm3 Bend strength: 15 ~ 25kg cm3 Vickers hardness: (HV) 570kg mm2) Porosity rate: 7. 4% Water absorption: 2% Heat extensibility: 4% Resistivity Properties of MoSi2 Heating Element The resistivity of

Alumina Milling Balls

Use anti-rust oil after the operation and store it in a dry place to avoid rusting

it can grind samples under the vacuum condition or be filled with inert gas

pressing die set made of 316 stainless steel

Surface Density before rolling: 350g/m^2   Length: 300 mm

88  Gauge (MPa) Protection Cover

Please click the picture below to choose a SS or super-alloy tube from 25 mm to 50 mm  ( Pic

If you have any questions on IP conflict

working temperature 1800 oC Warning Please don't use alumina tube under vacuum at temperature > 1500 oC when vertically-mounted and >1400 oC when horizontally-mounted

Handcrafted from the finest agate stone with shining polished grinding surfaces

Test Reports and Curves for analysis

5") Detailed dimension drawing Max