THL-VHH600 - Bottom V-Groove Insert for Fiber Holding Blocks, Ø540 µm - Ø660 µm Coating

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

THL-VHH600 - Bottom V-Groove Insert for Fiber Holding Blocks, Ø540 µm - Ø660 µm CoatingTHL VHH600 Bottom V Groove Insert for Fiber Holding Blocks, 540 m 660 m Coating V Groove Inserts Align Fibers within the Fiber Holding Blocks Included with the Workstation Base Unit Support Buffer or Coating Diameters Ranging from 90 m to 990 m (See Table to the Right) Two Required: One Each for Left and Right Holding Blocks Compatible Fiber Buffer Coating Diameters Item # Nominal Diameter Minimum Diameter Maximum Diameter THL VHH100 100 m 90 m 110 m

High drop capacity - See grommet chart

0 90% (Storage) Consumption: less than 35W (at full PoE+ consumption) Dimensions(WxDxH): 108mm x 74mm x 23mm with separate AC adapter Weight: 480g (80g for converter only) Compliance: CE

and upgrade to TRM 3

Specifically designed and formulated for wrapping wire and cable

Fluke Networks F1-500 Fiberinspector Micro-fiber Inspection Scope Datasheet

+ 1 100BaseFX SC Multimode port

To achieve the proper end face surface

dry location in unopened containers at a temperature between ° to 2°C (4° to 8°F) unless otherwise labeled

25mm swabs (10) GREEN

EXPO OX1 Optical Explorer Datasheet

The plenum and riser product lines are both UL 2024 listed and are among the most flexible flame-rated Innerduct products on the market

Ø350 µm - Ø450 µm Coating

Exchange/Return Notes