Edwards 3-FIBMB2 Fibre Optic Communications Interface Module

Edwards 3-FIBMB2 Fibre Optic Communications Interface ModuleEST3 networks easily configure to single or multi mode fiber optic or combination fiber optic copper networks using the 3 FIBMB2 Fiber Optic Communications Interface and the appropriate fiber optic transceivers. The 3 FIBMB2 electronics card plugs right into the CPU. A ribbon cable connects the 3 CPU directly to the 3 FIBMB2 fiber interface card. The interface card mounts in the 12 footprint space in a 3 CHAS7 chassis or 3 CAB5 enclosure. The 3 FIBMB2

Industrial

\n\nThese appliances are suitable for indoor and outdoor applications

ideal for mass notification

The series includes a 135°F/57°C fixed-temperature

The Edwards / EST SIGA-CR Control Relay Module provides a Form “C” dry relay contact to control external appliances such as door closers

Simplex fire alarm control panels with NACs selected to provide strobe synchronization or SmartSync two-wire control

Backward compatible with VLS and VESDAnet

Used to supervise and activate sounders

The strobe is individually address and individually controlled with power

The same happens when there is dirt inside the base or any other type of trouble

and other normally open contacts

The Simplex 2099-9756 Manual Pull Station is a non-coded