Square Tube Die for Portabender Tube and Pipe Bender (1-1/2" OD, 7" CLR) NPS 1-1/2

Square Tube Die for Portabender Tube and Pipe Bender (1-1/2" OD, 7" CLR) NPS 1-1/2Specs Outside Diameter of the Tubing (OD): 1 1 2" (38. 1 mm) Minimum Wall Thickness (Mild Steel): 0. 065" (1. 7 mm) Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 125" (3. 2 mm) Centerline Radius: 7" (177. 8 mm) Maximum Degree of Bend: 90, after springback Includes Steel Main Die Aluminum Follow Bar Steel U Strap Resources Tube and Pipe Bending Basics What Am I

Centerline Radius: 4-1/2" (114

and 1-1/2" Dimple Dies

Use a hand drill or drill press

Outside Diameter of the Tubing (OD): 28

Focus on Design Flexibility:

and offset notches in up to 2" OD tubing (NPS 1-1/2 pipe)

Bend-Tech Profile Bending (PB) software has been designed to work with bending machines often referred to as section

Includes: 2" Dimple Dies | Requires 2" Pilot Hole

see our full warranty policy

Outside Diameter of the Tubing (OD): 19

Outside Diameter of the Tubing (OD):2-1/2" (63

120" tubing or NPS 1-1/2 pipe manually