Bondtech CHT® Coated Brass Nozzle for E3D & Slice Engineering Hotends - Various Sizes Diameter:0.4mm

Bondtech CHT® Coated Brass Nozzle for E3D & Slice Engineering Hotends - Various Sizes Diameter:0.4mmManufactured for High Flow Applications Main Bondtech CHT Advantages Higher melt capacity by increasing the surface area of the heating walls Affordable price Machined with ultra precision Brass nozzle with Nickel coated surface Follows nozzle standards: RepRap (M617. 512. 5) MK8 (M61513) May be used with 1. 75mm or 2. 85mm hotends. Advantages of the Bondtech CHT technology: Bondtech CHT nozzles split the filament into 3 thinner strands allowing to

drying in an oven for ~ 1hr at 85C-95C may be required for bubble free high strength prints

With the print volumes increasing and interest of larger 3D printed items such as furniture and automotive parts

you also have the option of using Slice Engineering Mosquito thermistor and 50W heater

800 for Bridge when 3D printed

3V regulators

XSTRAND™ filaments must be stored in a dry and temperate location

You can buy this material on the BuildTak website www

and doesn't need a thermistor

Simple to print

This happens to almost all the filaments

Compatible with: all SLA and DLP printers

1x MKS Power Outage Detection Board