PELCO NetMesh™ Lacey Carbon Type A with removable Formvar

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

PELCO NetMesh™ Lacey Carbon Type A with removable FormvarOVERVIEW PRODUCT SPECIFICATIONS Substrates, Support Films for Transmission Electron Microscopy Grids PELCO TEM grid Support Films of Formvar, Formvar Carbon, Carbon, and Silicon Monoxide are available on the following 3. 05mm O. D. grids: 0. 4 x 2mm single slot Cu, 75 mesh Cu, 200 mesh Cu,Ni or Au, 200 mesh Hex Mo, 300 mesh Cu, Ni or Au, 300 mesh Hex Mo, and 400 mesh Cu, Ni, Au, Al, Ti and stainless steel. Support films on the finer mesh grids can

6 probes and cups

(Type-A) Thin Sections G B G B G B G Yes Viral Suspensions - G G B B B B Yes Typically packaged in PELCO® TEM Grid Storage Box (Product Number 160) but is subject to change to other equally suitable grid storage boxes

Titanium roughness sample DESCRIPTION

ESD-safe material

The stick is 4mm wide by 75mm long and has a slot along its center with small undercut notches on one side to make grid removal simple

Fine Tips 1 120mm NM-SS Au plated 0

Holds 20 flat blocks

8 Cantilever Thickness (RNG): 5

4x3mm die: Bump height (about 50nm) and width (about 150nm) not calibrated

5 5 36 - • G2000HA 12

Cantilever Material: Stainless Steel Cantilever Thickness (Nom): 13 Cantilever Thickness (RNG): 11 - 15 Cantilever Geometry: Rectangular Cantilevers Number: 11 - 31

04ohms/square

Exchange/Return Notes