Electrode Adapter SGJ to rod-shape electrode Select size::SGJ 24/25 to 6 mm dia. The default size of tri-axial

The default size of tri-axial nozzle is  shown below

due to the limited glass chemical resistance

we can do so at the extra cost

005ohm-cm  (If you would like to measure the resistivity accurately

Electrode Adapter SGJ to rod-shape electrode Select size::SGJ 24/25 to 6 mm dia. The default size of tri-axialThe electrode adapter is used for installing rod shape electrodes into laboratory glassware with SGJ standard port. It enables using disk electrode, plug with clip or any other rod shape electrode (e. g. graphite rod) or current collector (e. g. metal mesh, graphite coated metal mesh, metal foil, graphite coated metal foil, metal foam, carbon woven and non woven fabrics, carbon paper, etc.) as an electrode. The electrode adapter is made of PEEK. It