180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (45.0 mm OD, 177.8 mm CLR) Square Tubing

180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (45.0 mm OD, 177.8 mm CLR) Square TubingSpecs Outside Diameter of the Tubing (OD): 45. 0 mm Minimum Wall Thickness (DOM): 0. 095" (2. 4 mm) Minimum Wall Thickness (4130): 0. 095" (2. 4 mm) Minimum Wall Thickness (ERW): 0. 109" (2. 8 mm) Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 7" (177. 8 mm) Maximum Degree of Bend: 180, after springback Maximum Ovality: <10%,

Maximum Wall Thickness: 0

Brute Tube and Pipe Bender

Minimum Wall Thickness (ERW): 0

000 PSI electric/hydraulic pump

Effortlessly handles even the heaviest materials

2" (w) x 9/16" (leg) Channel Stock - Easyway

Centerline Radius: 2-1/2" (50

Tooling changes in seconds

This roll set will bend the following sizes of material: 1-1/2" x 1-1/2" Square

Roughly 3x faster than our air/hydraulic pumps

Outside Diameter of the Tubing (OD): 1/2" OD (12

SE is a must have if your job