Textiles. Measurement of water vapour permeability of textiles for the purpose of quality control Ingestion-build-109673

Textiles. Measurement of water vapour permeability of textiles for the purpose of quality control Ingestion-build-1096731 Scope This document describes a comparatively simple method for testing the water vapour permeability of textiles that will provide the manufacturer with a clearly recognized method for quality control within the plant. The simple test method described in this document is not applicable for classifying the water vapour resistance of textiles against values relating to physiological effects specified in product standards, and particularly not those

This part of ISO 9222 specifies the general simplified representation for seals

a) an  abstract  model  for  defining  application  resources  (objects)  capable  of  being manipulated by users via the use of the FAL service

provided that the dimensions of any inhomogeneity in close proximity to the heat flow meter (HFM) is much smaller than its lateral dimensions and are not thermal bridges which can be detected by infrared thermography (see 6

Use ISO 20558-1 guidelines in order to obtain reproducible

The people who work for an organization have rights over and above those in law or regulation

The guidance provided is of a general nature and its application to specific lightning protection installations has to take into account the particular conditions pertaining to those installations

The total thickness of the thin film layers should be 100 times less than the thickness of a supporting substrate (typically a silicon wafer piece)

telecommunications kiosks and image storage and display devices

EN 4165-009 and EN 4165-010

BS EN 60601-2-54 is part of a series of international standards on medical electrical equipment

NOTE The technical procedures covered in this British Standard are split into one “standard calibration” (Clause 7)

Why should you use BS 8524-2- Code of practice for active fire curtain barrier assemblies