8-Wire Power Cable, 1000mm length Boards A5 Quick-Turn PPC (Pogo Pin

A5 Quick-Turn PPC (Pogo Pin Cassette)

This does not include the power source

To perform in-circuit testing on a customized Printed Circuit Board (PCB)

The pogo pins are hand-wired to a standard "QuickLink210" PCBA with the HD78 and PWR8 connectors used by the PLT-300A as well as an IDC-20 for JTAG/SWD and an IDC-40 for a Raspberry Pi

8-Wire Power Cable, 1000mm length Boards A5 Quick-Turn PPC (Pogo Pin8 Wire Power Cable, 1m length. This cable is generally used to connect the PLT to the pogo pin cassette and it provides power to the device under test (DUT). The conductors are much thicker than those in the HD 78 cable which are intended for measurement and firmware flashing.