Honeywell Gamewell FCI MS-7ASF Pull Station

Honeywell Gamewell FCI MS-7ASF Pull StationThe Gamewell FCI MS 7ASF Velociti Series addressable station is a single action manual pull station designed for installation in the signaling line circuit (SLC) of Gamewell FCI analog addressable control panels. The door contains an LED which flashes green in normal condition and lights steady red when the station has been activated.

SK-Control addressable notification modules provide supervised monitoring of wiring to load devices that require an external power supply to operate

An advantage of this single-ended reflective design is that it is much easier to install than the dual-ended projected beam detectors

The Edwards / EST SIGA-CR Control Relay Module provides a Form “C” dry relay contact to control external appliances such as door closers

where other methods of smoke detection are difficult to install and maintain

status information (NORMAL

Application/Usage: Indoor

addressable carbon monoxide (CO) detectors with integral communication to provide point location for alarm communication and selective maintenance

and a humidity range of 0 – 95 percent (non-condensing

The LCD-E3 (Liquid Crystal Display) is the main panel’s

the System Sensor L-Series with LED notification appliances offer a new diagnostic test point feature that allows you to measure device voltage with a digital voltage meter (DVM) without removing the appliance from the wall or ceiling

tone signaling and visible signaling to alert the hearing impaired

The large wire entry port and in-line terminals provide ample room for neatly routing the wiring inside the base