EPX3 Anchoring Epoxy Cartridge accessory

EPX3 Anchoring Epoxy Cartridge accessoryThe EPX3 is a two component resin adhesive particularly suitable for anchoring into asphalt. The adhesive can be applied at temperatures as low as 14F. The adhesive fills the crevices in the asphalt as it cures, forming a strong mechanical bond with the asphalt on the one hand, and with the anchor on the other. This is a stress free bond that does not weaken with time. The EPX3 is supplied as a single 10 oz. cartridge that fits most single tube caulk

choose our 10lb tub

Proper cleaning is critical to full strength installation

If you need more than 4 SP10

The 40:1 mechanical gain of the CG40 makes applying the grout a breeze

14"+ cutting length

NOTE you MUST use a high gain caulk gun - we recommend the use of our CG40 hi-thrust caulk gun with 40:1 mechanical gain

The anchor requires a 7/8" hole 12" deep and the use of a grout such as our EPX2 or EPX3

It can be used with all BoltHold anchors

4" diameter header at the top of the anchor prevents the anchor from dropping below the surface

STAINLESS KIT: The SP10-3SK is a set of 6 anchors

The 12" long SP12-38 incorporates a 3/8"-16 UNC female internal thread

We offer 2 variants