PELCO SEMClip™ Ø12.5mm Pin Stub Single 90°

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

PELCO SEMClip™ Ø12.5mm Pin Stub Single 90°DESCRIPTION PELCO SEMClip Specimen Mounts The PELCO SEMClip SEM specimen mounts have been specifically designed to provide an easy, quick and clean way to mount any type of thin specimen on a specimen stub. The spring loaded clips can accommodate samples with a thickness up to 2mm. The samples are held down securely by a small spring loaded clip and allow for easy change of samples. They do not require the use of adhesives thus avoiding waiting times

5+/-5deg Tip Radius (Nom): 20nm Tip Coating: Highly conductive single cystal diamond Tilt Compensation: 4 +/- 1deg

Unmounted n-type staircase SSRM sample

Tip Geometry: Rotated Tip Height: 3 - 8 Front Angle: 15 Back Angle: 1 - 24 Tip Radius (Nom): 30 Tip Radius (Max): 36 Tip Set Back (Nom): 3 Tip Set Back( RNG): 0-5

Tipevaluation software provides on-command "worst case" probeshape diagnosis based on scanning of this roughness sample

Includes a subset of PeakForce QNM samples

Al Reflective Coating DESCRIPTION

Selection of 3 block type test gratings with different step heights intended for Z-axis calibration of scanning probe microscopes and linearity measurements

Replacement Tips 5X PVDF 0

Fine 5X 109mm NM-SS 0

Usability: the calibrated pattern covers the entire chip

Short Adapter Pin to M4 Thread

15477-10 - Additional Clamp for 102mm (4")

Exchange/Return Notes