Takaab SMULTI-1U Switched Passive Multiple

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Takaab SMULTI-1U Switched Passive MultipleThis passive module works as a 1 in 6 out multiple or as two smaller multiples. Any signal or voltage put into the top input will be split between the 6 outputs of the module. When a signal or voltage is added into the lower input, this creates two separate multiples So the top input is then split between the top three outputs, and the lower input is split between the bottom 3 outputs. As this is a passive module, expect some drop in level. However,

most noticeable on shorter

Two passive vactrol-based low-pass gates

A header on the board allows the user to connect the reset signal from the button of an adjacent OCD unit to reset the ECD

meaning the centre input is panned 50:50 to each output

For this you need the Takaab 4VIV

but will turn back on only when as there is a gate/high signal on the jack and only for either the A slope or R slope

4x M3 screws

the HPF-3320 is also available and the two play very nicely together

that stage is connected directly to the COM socket

For that you need a logic inverter / NOT gate

Useful for boosting weak signals

Pushing LINK button means a jack inserted into either A