Heavy Duty Ball Bearing Linear Slide SDC43N-0930-210 C-Shaped Guide Rail 43x930mm, 210mm Internal Carriage Linear Bearing

Heavy Duty Ball Bearing Linear Slide SDC43N-0930-210 C-Shaped Guide Rail 43x930mm, 210mm Internal Carriage Linear BearingBall bearing linear slide with a 43mm width, 930mm length and 210mm internal carriage for high load guided motion with a maximum stroke of 670mm. This SDC Series linear guide uses hardened steel drawer slide technology in a fixed C shaped rail profile, keeping the internal carriage captured inside the rail rather than telescoping outward like a full extension drawer slide. A precision ball cage assembly travels between the carriage and rail surfaces,

Miniature ball screw linear actuator with a NEMA 14 motor

A set of three opposing roller bearings includes one eccentric bearing that allows for alignment adjustments

Slide Direction: Single – use the configurator to select double direction

Variants with open shells are available with the part number FJN

Sealed cam roller (yoke-type cam follower) with a 7/8″ outer diameter (OD)

Total of 8 Adjustable Frelon®J plugs secured with removable Loctite thread locker

Round Linear Shaft Support for a 50mm diameter shaft

with a 2" precision ID (inner diameter) that provides a 0

No lubrication port (for this

Customizable to fit specific requirements

690mm length and 290mm fully enclosed internal carriage

the inserted bearing can tilt slightly within the housing to compensate for up to 1/2° of misalignment in all directions