50 mL cell chamber Select material::PTFE

50 mL cell chamber Select material::PTFEThis is the replacement chamber for 50 mL voltammetry cells including the following models: BEC 50 mL Basic Electrochemical Cell PTFE BEC 50 mL PTFE Basic Electrochemical Cell 2 CEC 50 mL Two compartment Electrochemical Cell 2 CEC+ 50 mL Two compartment Electrochemical Cell with additional inlet outlet 2 CMEC 50 mL Two compartment Multiport Electrochemical Cell Autoclavable 2 CEC 50 mL Autoclavable Two compartment Electrochemical Cell BE H Cell 50 mL

Control modules to be installed on the temp

JGS1 provides high optical transmission in the 185–2500 nm range

20 mm (for the separator to fully separate the electrodes in both negative and positive cases)

Dipping depth of ultrasonic processor rod: 30 mm

Optional Syringe Pump

hydrogen fluoride and fluorocarbon if it is idle for a long time at the temperature between 310 320

100 ºC  (Nylon material)

001- ohm-cm  +/-  factor of 2

Single crystal SrTiO3 with 0

1 KW Motor Speed 2800 RPM Cutting Blade Two 10" OD x 2 mm (Thick) x 1

Please consider to have Seals metal threads to prevents leakage for MTI Flange (MTI-SEAL-MT)

2 µm pore size PTFE membrane for Lithium Air Battery research